SICK MITSUBISHI ELECTRIC MELSEC iQ-F Series - Page 161

APPX
Appendix 6 How to Use MELSEC iQ-F Series Safety Extension Module Configuration Guide
159
A
Device connection destination selection screen
When clicking a device on the menu or in the module configuration area, the connection destination selection screen is
displayed as shown below.
Window
■When clicking a device on the menu
■When clicking a device in the module configuration area
Displayed items
No. Item Description
(1) Device To display a device type and its description.
(2) Connectable program To display program numbers that can be connected to a safety extension module.
(3) Select To register a device to the select area of the module configuration area.
(4) Delete To remove a device from the module configuration area.
(5) Device connection destination To display the terminal(s) of a safety extension module which can be connected to a device.
By clicking a connection destination, the device can be connected to the terminal(s) of a safety extension
module in the module configuration area.
The connection destination(s) is/are displayed when a corresponding program that can connect the device is
set in the safety extension module in the module configuration area.
(1)
(2)
(3)
(5)
(1)
(2)
(4)
(3)
(5)