SICK MITSUBISHI ELECTRIC MELSEC iQ-F Series - Page 160

158
APPX
Appendix 6 How to Use MELSEC iQ-F Series Safety Extension Module Configuration Guide
Module configuration area
The following explains the screen configuration of the module configuration area.
Window
Displayed items
*1 Retriggering is a function to disable off delay when an input is in the safe state while the off delay operates.
No. Item Details
(1) Select To temporarily place a device may be connected to a safety extension module.
The input or output devices whose "Select" is selected in the device connection destination selection screen
are displayed.
(2) (FUNCTION details) To check the program description of each rotary switch.
The following shows the display example:
(Example) When the program 2 is set for an FX5-SF-MU4T5.
(3) FUNCTION setting To set a program number.
(4) DELAY setting To set a delay time.
(5) (DELAY details) To set a delay time and retriggering
*1
.
The following shows the display example:
(Example) When the program 2 is set for an FX5-SF-MU4T5.
(6) (Setting) To change the connection order of a safety extension module by clicking the or button.
By clicking the button, the safety extension module can be deleted from the module configuration area.
(1)
(2)
(2)
(3)
(4)
(5)
(6)