APPX
Appendix 6 How to Use MELSEC iQ-F Series Safety Extension Module Configuration Guide
161
A
Connecting an input device to input terminals of the safety extension module
The following shows the procedure for connecting an input device to a safety extension module displayed in the module
configuration area.
Connecting an output device to output terminals of the safety extension module
The following shows the procedure for connecting an output device to a safety extension module displayed in the module
configuration area.
1. Click "Input Devices" on the menu and select a device
from the list.
The device connection destination selection screen is
displayed.
2. Select an arbitrary terminal(s) from the device
connection destination.
The selected input device connected to the safety extension
module is displayed.
1. Click "Output Devices" on the menu and select a device
from the list.
The device connection destination selection screen is
displayed.
2. Select an arbitrary terminal(s) from the device
connection destination.
The selected output device connected to the safety extension
module is displayed.
To Next Page
Loading...
