162
APPX
Appendix 6 How to Use MELSEC iQ-F Series Safety Extension Module Configuration Guide
Editing a device connected to the safety extension module
The following shows the procedure for changing the placement of a device connected to the safety extension module and
removing the device from the module.
■When changing a device placement
■When removing a device
1. Click a device to change a placement in the module
configuration area.
2. Select an arbitrary terminal(s) from the device
connection destination in the device connection
destination selection screen.
1. Click a device to be removed in the module
configuration area.
The device connection destination selection screen is
displayed.
2. Select "Delete".
To Next Page
Loading...
