APPX
Appendix 6 How to Use MELSEC iQ-F Series Safety Extension Module Configuration Guide
163
A
Printing a module configuration
The following shows the procedure for printing a module configuration.
Setting a restart interlock and EDM
The following shows the procedure for setting a restart interlock and EDM.
1. Click the (Configuration) on the toolbar.
The configuration screen is displayed.
2. Click the [Print] button.
The print screen of the browser is displayed.
3. Click the [Print] button.
1. Click the (General input settings) on the toolbar.
General input settings are displayed in the module
configuration area.
2. Click the (Setting).
The setting screen of a restart interlock and an external
device monitoring (EDM) are displayed.
3. Set a restart interlock and EDM.
To Next Page
Loading...
