3.3.3 Position output
The sensor can output a linearized position in a detection range of approx. 50 mm
(depends on t
he dr
ive).
When leaving the detection range, value 32,767 or -32,767 digits
1)
 is displayed.
Figure 5: Zero point / Physical zero position
1
Zero point / Physical zero position
2
Positive positions
3
Negative positions
4
Sensor detection range: -3,000 digits ... 3,000 digits
5
Piston position
6
Sensor position output
3.3.4 Switching behavior after Manual Teach of up to 3 switching points
Switching behavior after Manual T
e
ach is as follows per switching point during operation:
1)
1 digit cor
responds to 10 µm.
3  PRODUCT DESCRIPTION
12
O P E R A T I N G   I N S T R U C T I O N S  | MPS-G with 2 / 3 switching points and IO-Link (up to 16 switching points) 8025942/2020-07-16 | SICK
Subject to change without notice