°
Reset operating hours counter
°
Reset power cycles counter
°
Reset actuator cycles counter
°
Reset total actuator travel
°
Reset all actuator diagnostics parameters
°
Application reset
•
Position offset
•
Dynamic teach-in of 2 or 3 switching points
•
Manual teach-in of up to 8 switching points
•
Switching point modes
•
Switching point logic (invert)
•
Switching point hysteresis
•
Switching point tolerance
•
Switching point width
•
Alert notifications
8.4.3.1 Pin 2 configuration
The physical pin 2 can be deactivated via index 121 (0x79) Pin 2 configuration and
activated as Qint.2.
8.4.3.2 Lock teach-in button
The physical teach-in button on the sensor can be locked via index 12 (0x0C) Device
Access Locks subindex 4 (0x04) Local User Interface.
8.4.3.3 Reset
Device Reset
No values/settings are deleted during this restart except for the volatile parameters.
An overview of the volatile and non-volatile parameters can be found below, (index 2
(0x02) System Command, value 128):
Table 11: Volatile and non-volatile parameters
Index Object name Volatile / non-volatile
4372 (0x1114) Actuator travel [x10 µm] Volatile
4380 (0x111C) Cycle time [ms] Volatile
4381 (0x111D) Dwell time [ms] Volatile
4379 (0x111B) Actuator travel time [ms] Volatile
4375 (0x1117) Average actuator velocity [m/s] Volatile
4602 (0x11FA) Current field strength [mT] Volatile
4604 (0x111FC) Peak field strength Volatile
4374 (0x1116) Total actuator travel [sum m] Non-volatile
4382 (0x111E) Cycle count [sum] Non-volatile
Qint. 1-8 SP1/SP2
Qint. 1-8 Configuration
Non-volatile
Restore Factory Settings
When this command is executed, all settings made are reset to their default values, but
not the indices 4356 (0x1104 Operating hours), 4357 (0x1105) Power cycles, subindex 1,
4382 (0x111E) Cycle count [sum] and 4374 (0x1116) Total actuator travel [sum m] (index 2
(0x02) System Command, value 130).
8 OPERATION
38
O P E R A T I N G I N S T R U C T I O N S | MPS-G with 2/3 switching points and IO-Link (up to 8 switching points) 8028195/2022-11-30 | SICK
Subject to change without notice