4 Transport and storage
4.1 Transport
NOTICE
Damage due to improper transport!
■
The product must be packaged with protection against shock and damp.
■
Recommendation: Use the original packaging.
■
Note the symbols on the packaging.
■
Do not remove packaging until immediately before you start mounting.
4.2 Unpacking
•
To protect the device against condensation, allow it to equilibrate with the ambient
temperature before unpacking if necessary.
•
Handle the device with care and protect it from mechanical damage.
4.3 Transport inspection
Immediately upon receipt in Goods-in, check the delivery for completeness and for any
damage that may have occurred in transit. In the case of transit damage that is visible
externally, proceed as follows:
•
Do not accept the delivery or only do so conditionally.
•
Note the scope of damage on the transport documents or on the transport compa‐
ny's delivery note.
•
File a complaint.
NOTE
Complaints regarding defects should be filed as soon as these are detected. Damage
claims are only valid before the applicable complaint deadlines.
4.4 Storage
•
Do not store outdoors.
•
Store in a place protected from moisture and dust.
•
Recommendation: Use the original packaging.
•
Do not expose to any aggressive substances.
•
Protect from sunlight.
•
Avoid mechanical shocks.
•
Storage temperature: see "Technical data", page 36.
•
For storage periods of longer than 3months, check the general condition of all
components and packaging on a regular basis.
4 TRANSPORT AND STORAGE
12
O P E R A T I N G I N S T R U C T I O N S | UC40 8027772//2022-08-11 | SICK
Subject to change without notice
To Next Page
Loading...
Need help?
General
