13.D.1.6 USB>RS232/485 Converter 050201
The USB>RS232/485 Converter can be ordered at SIEB & MEYER as an optional
accessory for device configuration. This converter is developed especially for the
amplifier series SD2x. Via the converter the devices can communicate with a PC
without RS232 or RS485 interface.
A short USB cable is supplied with the converter. The connection cable to the drive
amplifiers must be ordered additionally or built by yourself with suitable length.
SIEB & MEYER article number Description
050201 USB>RS232/485 converter
K362103xxxR01 (xxx = cable
length in dm)
RS232 device connection cable to the converter 050201
For further information refer to the document “050201 – USB>RS232/485 Converter”.
13.D.2 Phoenix Contact
http://www.phoenixcontact.com
Order key for Phoenix connectors
Labeled connectors can be ordered at SIEB & MEYER.
13.D.2.1 Surge Arrestor FLASHTRAB
Phoenix article number
Description
2905469 Surge arrestor FLT-SEC-T1+T2-3C-350/25-FM: with combined PE and
N installed in one conductor (L1, L2, L3, PEN)
W
Appendix D: Manufacturers
Drive System SD2S - Hardware Description 0362X49xy / 0362129xy 111
13.D
To Next Page
Loading...
Need help?
General
