SIEB & MEYER SD2S 0362249xy - NRTL Requirements

TÜV SÜD Product Service is an NRTL approved by OSHA and undertakes product
certifications for industrial controls, electric drives and other products. The following
links lists the approved NRTL laboratories:
https://www.osha.gov/dts/otpca/nrtl/nrtllist.html
The tested devices are labeled with the following symbol:
The device series 0362X49xy/0362129xy is tested accoring to the harmonized
standard IEC / UL 61800-5-1: “Standard for Adjustable Speed Electrical Power Drive
Systems – Part 5-1: Safety Requirements – Electrical, Thermal and Energy”
▶ Date: 2016-11-17, extended on 2018-04-25
▶ Power converter:
0362149EF / 0362249EF / 0362129EF
0362149IF / 0362249IF / 0362129IF
0362149EC / 0362249EC / 0362129EC
0362149IC / 0362249IC / 0362129IC
▶ Certificate number: U8V 16 11 96098 005
▶ Certificate data base:
https://www.tuev-sued.de/product-testing/certificates
(Enter “SIEB & MEYER AG” in the search field.)
http://www.tuev-sued.de/industry-and-consumer-products/-services/nationally-
recognized-testing-laboratory-nrtl
http://www.tuev-sued.de/industry-and-consumer-products/-branches/industrial-
electronics
2.2 NRTL Requirements
Points of Exceptions of the Test Procedure and Conditions of Acceptability
Conditions of Acceptability:
▶ When installing, requirements of mentioned Test Standards and Installation Guide
have to be fulfilled.
▶ The equipments are intended for use in end-use application within final enclosure
to maintain a pollution degree 2 or equivalent environment.
▶ The final enclosure has to fulfill the requirements for the protection in case of
direct contact.
▶ Maximum Surrounding Air Temperature: +40 °C.
▶ The Terminal blocks are suitable for factory wiring only.
▶ The end-use application must be equipped with a Branch Circuit Protection that
meets the requirements of the NRTL certificate.
▶ All Branch Circuit Protection shall have characteristic B.
▶ The diameter of the protective earthing conductor shall be 10 mm² (AWG 8) or
higher.
General Information
W
14 Drive System SD2S - Hardware Description 0362X49xy / 0362129xy
2