EasyManuals Logo

SIEB & MEYER SD2S 0362249xy User Manual

Default Icon
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Code Error message Error reaction Possible reason
1
EMF monitoring
1, 2, 3 4
2
Flux monitoring
4
3
Over current monitoring
4
4
Under flux monitoring
4
5
Minimum speed monitoring
1 ,
2, 3
6
Error during alignment
1, 2
7 Current limitation V/f oscil‐
lates
5
E45
(0x52D)
(1325
d
)
Short circuit in power output stage
Drive is immediately disabled,
motor coasts to standstill.
Short circuit of the power output stage
due to:
1 Internal short circuit 1 Faulty drive control
2 (VCE) desaturation detection 2 Wrong parameters, output stage
defective, broken cable, short
circuit etc.
3
Short to ground 3 Short to ground of a motor phase
4 Current measuring range 4 Wrong parameters, output stage
defective, broken cable, short
circuit etc.
5
Overload motor 5 Drive function V/f: incorrect para‐
meter setting of “Flying restart”
E46
(0x52E)
(1326
d
)
1
Safety circuit (Safety X10) Drive is immediately disabled,
motor coasts to standstill without
control.
1
Safety circuit STO is activated
when the output stage is active;
input SAFE A and/or input SAFE B
were triggered.
2
Initialization error: internal
hardware of safety controller
2 Safety function SFM/SLOF: error
in according hardware compo‐
nents of the safety controller
3
Incorrect data/parameters in
process sequence
3 Safety function SFM/SLOF: faulty
PLC telegrams
4 Error in function parameters
for a functional part
4 Safety function SFM/SLOF: para‐
meter is out of limits
5 Timeout of monitoring func‐
tions
5 Safety function SFM/SLOF: error
in according hardware compo‐
nents
6
Monitoring of OSSD signals
and output stage enable
6 Safety function SFM/SLOF:
wrong OSSD signals
defective OSSD relay
defective multiplexer
7
Monitoring of motor phases 7 Safety function SFM/SLOF: defec‐
tive motor cable (broken cable)
8 Frequency exceeded 8 Safety function SFM/SLOF:
set reference speed value is
too high
limit value for Safe Limited
Output Frequency is parame‐
terized incorrectly
OSSD signals are set incor‐
rectly
Status Display and Error Messages
W
86 Drive System SD2S - Hardware Description 0362X49xy / 0362129xy
10

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SIEB & MEYER SD2S 0362249xy and is the answer not in the manual?

SIEB & MEYER SD2S 0362249xy Specifications

General IconGeneral
BrandSIEB & MEYER
ModelSD2S 0362249xy
CategoryDC Drives
LanguageEnglish

Related product manuals