Siemens 6EP4135-0GB00-0AY0

Engineering and remote access
3.5 Cyclic and acyclic data
SITOP UPS1600 / UPS1100
108 Manual, 04.2017, A5E37775406-8-76
0x0042: OPC UA server (reading/writing)
Data
Description
Data type
OPCServerEnabled Activate/deactivate the OPC UA interface of the SITOP UPS1600:
• 0: disable
• 255: enable
Unsigned8
OPCUnencrypdedAccessEnable Activate/deactivate unencrypted access via the OPC UA interface
of the SITOP UPS1600:
• 0: disable
• 255: enable
Unsigned8
OPCPort
Set port for OPC UA interface (1 to 65535)
Unsigned16
0x0043: NTP client parameters (reading/writing)
Data
Description
Data type
NTPServerEnabled Activate/deactivate NTP server:
• 0: disable
• 255: enable
Unsigned8 from
V2.2
Fill byte(s) - Unsigned8 from
V2.2
NTPServer1 IP address of NTP server 1 Unsigned8 from
V2.2
NTPServer2 IP address of NTP server 2 Unsigned8 from
V2.2
NTPServer3 IP address of NTP server 3 Unsigned8 from
V2.2
NTPServer4 IP address of NTP server 4 Unsigned8 from
V2.2
0x0044: NTP client status parameters (reading)
Data
Description
Data type
Last synchronization time Time that the last synchronization took place VisibleString(20)
from V2.2
Next synchronization time Time of the next planned synchronization VisibleString(20)
from V2.2
0x0045: PROFINETSecurity (reading/writing)
Data
Description
Data type
DCPReadonlyIfConnected Setting for DCP write protection Unsigned8 from
V2.2
Fill byte(s) - Unsigned8 from
V2.2