Engineering and remote access
3.7 Web server
SITOP UPS1600 / UPS1100
146 Manual, 04.2017, A5E37775406-8-76
This affects, for example:
● IP address
● Device name
● Parameter values for the SITOP UPS1600 and assigned supplementary modules.
● "Web server activated" setting. Web server is de-activated.
1. Select menu "Diagnostics".
2. Select submenu "Online functions".
3. Select entry "Reset to factory setting".
4. In the editor area, click on "Reset to factory settings".
5. Acknowledge the confirmation prompt with "OK".
You have the following options under menu item "HW Configuration > General":
● Configuring the PROFINET interface
● Making settings for the web server
● Making settings for the OPC UA server
● Making settings for the NTP client
● Making settings for PROFINET security
● Managing users
To Next Page
Loading...
