Siemens 6EP4135-0GB00-0AY0

Engineering and remote access
3.7 Web server
SITOP UPS1600 / UPS1100
148 Manual, 04.2017, A5E37775406-8-76
6. To assign a fixed IP address: Activate checkbox "Fixed IP address" and enter the
appropriate parameters in the editor area.
7. Load the data to the device, see Loading the configuration (Page 141).
3.7.8.2
Web server
Here, you can make general settings and define which actions should be automatically
executed.
Settings
Parameters
Value range
Default setting
Activate web server on this module
Yes/no
No
Permit access only with HTTPS
Yes/no
Yes
Log off automatically after 15 minutes
Yes/no
No
Update interval 0 / 5 s / 10 s / 20 s / 30
s / 60 s
0 = no automatic up-
date
●
Activate web server on this module
Define as to whether the device may be accessed via the web server.
●
Permit access only with HTTPS
Define whether access is only permissible via HTTPS.