Engineering and remote access
3.7 Web server
SITOP UPS1600 / UPS1100
142 Manual, 04.2017, A5E37775406-8-76
The currently pending system alarms are provided in this list.
Displaying the alarm history
1. Select menu "Diagnostics".
2. Select the "Alarm history" entry under "Alarms" in the navigation.
The alarm history is displayed in a tabular form.
The individual columns contain the following information:
● Name: A descriptive name of the alarm
● Date and time: The time and date when the alarm comes and goes
● Incoming/outgoing:
– incoming: Occurrence of the alarm event
– outgoing: Rectification of the alarm event
Note
The alarm history is displayed only when no further communications relationships to the
SITOP UPS1600 have been established.
Examples for further communications relationships are communication relationships via
ST
EP 7 or the SITOP UPS Manager.
To Next Page
Loading...
