Siemens 6EP4135-0GB00-0AY0

Engineering and remote access
3.7 Web server
SITOP UPS1600 / UPS1100
156 Manual, 04.2017, A5E37775406-8-76
"Maintenance"
Parameter
Value range
Default setting
R test interval
1 … 65535 h
4 h
R test: The battery state is determined by subjecting it to a cyclic load.
Energy storage device configuration
"Energy storage" has two different areas that depend on the battery type being used. First
select whether you are using a SITOP UPS1100 battery module or some other energy
storage.
Using a SITOP UPS1100 battery module
No additional parameterization.
Using a different battery module
Parameter
Value range
Default setting
Battery capacity
0.1 - 3,200 Ah
10 Ah
End-of-charge voltage
24 - 30 V
27.3 V
Charge current
0.001 - 3 or 4 or 5 A
0.3 A
Faulty battery voltage 1 - 18 V 6 V
●
Battery capacity
Total capacity of the installed batteries.
●
End-of-charge voltage
Maximum voltage up to which the battery may be charged.
●
Charge current
The battery is not charged with more than the selected charge current. The