Engineering and remote access
3.8 OPC UA server
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
177
Actual charging current used to charge battery.
ChargeEndVoltage Float AnalogItemType Battery voltage when charging changes to trickle charging.
Battery is charged 100 %.
ChargeTotalCurrent Float AnalogItemType Battery-specific data: Total charge to the battery during its
ModuleCalculated
Float AnalogItemType Available battery capacity
ModuleCalculated
Byte AnalogItemType State of health (SoS) as percentage of the rated capacity
ModuleChange
Boolean PropertyType Battery capacity is insufficient to achieve the specified buffer
ModuleCompound Enumeration MultiState
Connected device
ModuleConnection
Boolean PropertyType Connection to battery interrupted - check connection and
ModuleManufactoring
Date PropertyType Manufacturing date of the battery modules.
ModuleMax
Sbyte AnalogItemType Maximum specified operating temperature of the battery.
ModuleMin
Sbyte AnalogItemType Minimum specified operating temperature of the battery.
ModuleStandbyTime UInt32 AnalogItemType Battery-specific data: Time for which battery was connected
but no power was consumed.
ModuleStateLed Object Sitop_1600_
ModuleStateLed
ModuleTotalCulled
Float AnalogItemType Battery-specific data: Time for which battery was connected
AlarmBatteryChange
Boolean PropertyType Battery replacement canceled - battery parameters are not
AlarmBatteryChange
Boolean PropertyType Battery replacement finished - counters have been reset
AlarmBatteryChange
Boolean PropertyType Battery replacement started by user
AlarmBattery
Boolean PropertyType Communication with formerly known battery is no longer
possible - check communication