EasyManuals Logo

Siemens 6ES7 305-1BA80-0AA0 Product Information

Siemens 6ES7 305-1BA80-0AA0
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
SINAMICS S120 automation components
2.5 Expansion and system components
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04
11
2.5 Expansion and system components
Expansion and system components can be used to expand the
SINAMICS S120 base system so that it can perform functions directly in the drive system,
record encoder signals, etc.
Components
For example, the following components are available for SINAMICS S120:
The Terminal Board TB30 can be used to expand the CU320 control unit with
additional digital and analog inputs/outputs.
You require the Sensor Module Cabinet-Mounted SMC10, SMC20, SMC30 when a motor
is to be used without the DRIVE-CLiQ interface or an additional external encoder is
to be attached to the drive system.
The communication board CB10 provides an interface between the control unit
CU320 and a CAN bus system.
The CBE30 communication board provides an interface between the
CU320 control unit and a PROFINET system.
The Terminal Modules TM15, TM17, and TM41 provide additional inputs/outputs with
extended functionality (High Feature) that can be used as an output cam or measuring
input in the technology. Terminal modules are connected directly to the
CU 320 control unit by means of the DRIVE-CLiQ interface.
2.6 Determining the firmware version number
The SINAMICS S120 firmware can generally be determined in various ways.
What is important is whether a configuration already exists in S7T Config.
Determining the firmware version of the SINAMICS S120 from the CF Card
The version number of the SINAMICS S120 is stored on the Compact Flash Card.
The firmware of the SINAMICS S120 must be read from the CF Card when the firmware of
the SINAMICS S120 is not known and no current configuration is available in S7T Config.
The CF Card contains the "CONTENT.txt" file in the root directory. The
"internal version 02.20.28.00" line shows the currently loaded firmware.
The number 02.20.28.00 shown in this example is the current version number
of the firmware.

Table of Contents

Other manuals for Siemens 6ES7 305-1BA80-0AA0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens 6ES7 305-1BA80-0AA0 and is the answer not in the manual?

Siemens 6ES7 305-1BA80-0AA0 Specifications

General IconGeneral
BrandSiemens
Model6ES7 305-1BA80-0AA0
CategoryController
LanguageEnglish

Related product manuals