Siemens 6RA8018-6DV62

Commissioning
8.5 Commissioning with the STARTER commissioning tool
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
305
Brake control
Figure 8-22 Configuring a motor brake
⇒ Under configuration of the motor brake, select the corresponding setting for your device
configuration:
● [0] No brake
● [1] Holding brake
● [2] Operating brake
⇒ When selecting a motor brake, additionally set the
opening time
and the
closing time
.
⇒ Click
Next
>