Siemens 6RA8018-6DV62

Type spectrum, ordering information
2.4 Ordering information for options and accessories
SINAMICS DCM DC Converter
32 Operating Instructions, 12/2018, A5E34763375A
Option
Order codes
Nickel-plated copper bars
(for devices with aluminum bars as standard, use of nickel-plated copper bars)
M10
Control for switching over the power unit topology for devices connected in parallel and series
This option is described in the application document "12-pulse applications".
S50
Ordering information for accessories
Table 2- 5 Articles numbers for accessories
Article
Article number
Standard CUD retrofit kit
Combination of the spare parts, Standard CUD and connector board
6RY1803-0AA00-0AA1 +
6RY1803-0GA00
Standard CUD coated retrofit kit
Combination of the spare parts, Standard CUD coated and connector board coated
6RY1803-0AA20-0AA1 +
6RY1803-0GA20
Advanced CUD retrofit kit
Combination of the spare parts, Advanced CUD and connector board
6RY1803-0AA05-0AA1 +
6RY1803-0GA00
Advanced CUD coated retrofit kit
Combination of the spare parts, Advanced CUD coated and connector board coated
6RY1803-0AA25-0AA1 +
6RY1803-0GA20
CBE20 PROFINET
6SL3055-0AA00-2EB0
Memory card (equivalent to spare part for options S01 and S02)
6RX1800-0AS01
Terminal Module TM15
6SL3055-0AA00-3FA0
Terminal Module TM31
6SL3055-0AA00-3AA1
Terminal Module TM150
6SL3055-0AA00-3LA0
Sensor Module Cabinet-Mounted SMC10
6SL3055-0AA00-5AA3
Sensor Module Cabinet-Mounted SMC30
6SL3055-0AA00-5CA2
Mounting kit to increase the degree of protection to IP20 for 15 A to 30 A devices
6RX1800-0MA00
Mounting kit to increase the degree of protection to IP20 for 60 A to 280 A devices
6RX1800-0MA01
Mounting kit to increase the degree of protection to IP20 for 400 A to 600 A devices
6RX1800-0MA02
Mounting kit to increase the degree of protection to IP20 for 720 A to 850 A devices 6RX1800-0MA03
SICROWBAR overvoltage protection
Depending on device type
1)
Firing Unit Trigger-Board 6RY1803-0CP00
Fuses
Depending on device type
3)
Reactors
Depending on device type
4)
RFI suppression filter
Depending on device type
2)
STARTER commissioning tool
6SL3072-0AA00-0AG0
Drive Control Chart (DCC) for SINAMICS
6AU1810-1HA20-1XA0
Drive Control Chart (DCC) for SINAMICS and SIMOTION
6AU1810-1JA20-1XA0
1)
Please contact your local Siemens office.
2)
See Chapter "RFI suppression filter (Page 103)"
3)
See Chapter "Fuses (Page 149)" as well as the catalogs and reference sources specified in this chapter
4)
See Chapter "Line reactors (Page 146)"