Operation
9.2 Parameterizing using the BOP20 (Basic Operator Panel 20)
SINAMICS DCM DC Converter
372 Operating Instructions, 12/2018, A5E34763375A
Overview of important parameters (refer to the SINAMICS DCM List Manual)
All drive objects
● p0005 BOP status display selection
● p0006 BOP status display mode
● p0013 BOP user-defined list
● p0971 Drive object, save parameters
Drive object, Control Unit (CU_DC)
● r0002 Control Unit status display
● p0003 BOP access level
● p0004 BOP display filter
● p0007 BOP backlighting
● p0008 BOP drive object selection
● p0009 Device commissioning, parameter filter
● p0011 BOP password input (p0013)
● p0012 BOP password confirmation (p0013)
● r0019 CO/BO: Control word, BOP
● p0977 Save all parameters
● p0010 Commissioning, parameter filter
To Next Page
Loading...
