Descriptions of functions
10.38 Write and know-how protection
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
681
Configuring know-how protection
Make the settings for the know-how protection on the "Drive unit know-how protection" tab.
1. Click the "Drive unit know-how protection" tab.
Figure 10-108 Load to file system know-how protection
By default, the "Without know-how protection" option is active. If you really want to store
the data without protection (not recommended), you can exit the dialog box with "OK" or
"Cancel" at this point.
To Next Page
Loading...
