Siemens CALOMAT 6 - Operation; Setting the Station Address ULTRAMAT 6;OXYMAT 6;CALOMAT 6; OXYMAT 61

ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
113
5. Operation
5.1. Setting the Station Address ULTRAMAT 6/OXYMAT 6/CALOMAT 6/
OXYMAT 61
☛ Note
The basic principles of operation are explained in chapter 5 of the respective ULTRAMAT 6 /
OXYMAT 6 / CALOMAT 6 / OXYMAT 61 device manual.
The station address can be set in the main menu under Configuration.
The level 2 code is required for this.
7 Warning
Changing the station address can affect communication on the bus.
This function can be used to set the
PROFIBUS station address. Addresses
from 0...126 can be set.
90 PROFIBUS-Config. CO
2
________________________________________________
Address : 126