Siemens CALOMAT 6 - Firmware

ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
116
6.2. Firmware
If it becomes necessary to change the Firmware due to improvements, the flash EEPROM on the optional
module (socket module) will have to be replaced.
With CALOMAT 6 analyzers only firmware versions of 1.3.0 or later must be used.
The firmware can be ordered as a spare part with the item number
A5E00057164
from CSC Haguenau -> see chapter 6.1: SIEMENS SPA
6.2.1 ULTRAMAT 6, OXYMAT 6, CALOMAT 6, ULTRAMAT 23, OXYMAT 61 Firmware
An update may sometimes be required when the PROFIBUS option is retrofitted:
ULTRAMAT 6 (software version 4.2 or earlier)
German C79451-A3478-S501
English C79451-A3478-S502
French C79451-A3478-S503
Spanish C79451-A3478-S504
Italian C79451-A3478-S505
OXYMAT 6 and
OXYMAT 61 (software version 4.2 or earlier)
German C79451-A3480-S501
English C79451-A3480-S502
French C79451-A3480-S503
Spanish C79451-A3480-S504
Italian C79451-A3480-S505
CALOMAT 6 (software version 1.1.0 or earlier)
German A5E00092676
English A5E00092677
French A5E00092678
Spanish A5E00092679
Italian A5E00092680
ULTRAMAT 23 (software version 2.6 or earlier)
All languages C79451-A3494-S501