Appendix
A.4 Standards
Power Module PM240
130 Hardware Installation Manual, 07/2009, A5E00807525B AD
A.4 Standards
European Low Voltage Directive
The SINAMICS G120 product range complies with the requirements of the Low Voltage Directive
2006/95/EC. The units are certified for complaince with the following standards:
EN 61800-5-1 — Semiconductor inverters –General requirements and line commutated inverters
EN 60204-1 — Safety of machinery –Electrical equipment of machines
European Machinery Directive
The SINAMICS G120 inverter series does not fall under the scope of the Machinery Directive. However,
the products have been fully evaluated for compliance with the essential Health & Safety requirements of
the directive when used in a typical machine application. A Declaration of Incorporation is available on
request.
European EMC Directive
When installed according to the recommendations described in this manual, the SINAMICS G120 fulfils
all requirements of the EMC Directive as defined by the EMC Product Standard for Power Drive Systems
EN 61800-3
Underwriters Laboratories
UL and CUL LISTED POWER CONVERSION EQUIPMENT for use in a pollution degree 2 environment.
The Power Module FSGX did not fulfill the UL standard at print date.
The latest information regarding the Power Module is published under
http://support.automation.siemens.com/WW/view/de/30563173/133400
SEMI F47 Specification for Semiconductor Process Equipment Voltage Sag Immunity
SINAMICS G120 Power Modules PM240 fulfill the requirements of the SEMI F47-0706 standard.
ISO 9001
Siemens plc operates a quality management system, which complies with the requirements of ISO 9001.
Certificates can be downloaded from the internet under the following link:
http://support.automation.siemens.com/WW/view/en/22339653/134200
To Next Page
Loading...
Need help?
General