5.13 Activating Shared Device
Enabling Shared Device
If you control the inverter safety functions via PROFINET and "Shared Device", you must
enable this function in the inverter.
Requirement
You are online with STARTER or Startdrive.
Procedure with STARTER and Startdrive
To configure communication via "Shared Device" in the inverter, proceed as follows:
1. In STARTER change to the expert list, or in Startdrive, to the parameter view.
2. Set p8929 = 2.
You have configured the communication via "Shared Device" in the inverter.
Commissioning
5.13 Activating Shared Device
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
204 Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD
To Next Page
Loading...
Need help?
General