Siemens CU240S PN-F - Documentation of the Acceptance Test

Functions
5.12 Safety functions
CU240S and CU240E Control Units, FW 3.2
Operating Instructions, 03/2009, A5E02440075B AA
209
5.12.8.1 Documentation of the acceptance test
Overview
Acceptance test No.
Date
Person carrying out
the test
Table 5- 94 Description of the system and overview/block diagram
Designation
Type
Serial number
Manufacturer
End customer
Block diagram/overview diagram of the machine
Table 5- 95 Fail-safe functions for each drive
Drive No. Firmware version SI version Fail-safe functions
r0018 = r9770 = Example: STO
Table 5- 96 Description of the fail-safe equipment/devices
Drive No. Description
Examples:
Wiring of STO terminals (protective door, Emergency-Off)
grouping of STO terminals