143
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04
Structure of the PROFIBUS DP
Parameter Assignment and
Configuration Frame
When you require this information
This section describes the structure of the parameter assignment and configuration
frame for the DP/AS-Interface Link 20E. You require this information if you use
configuration tools that cannot interpret the GSD file of the DP/AS-Interface Link
20E supplied on diskette with this manual.
Note
If you configure the DP/AS-Interface Link 20E using configuration tools such as
STEP 7 or COM PROFIBUS, you do not require this information. The menus of
these tools show you the options available for configuring/assigning parameters to
the DP/AS-Interface Link 20E.
B
To Next Page
Loading...
