Siemens DP/AS-Interface Link 20E

Using the Command Interface
79
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04
Table 3-6 AS-i Slave Commands, continued
Name CodingReturnParameter
Change_AS-i_Slave_Address
–> described in Section 3.3.14
Address 1,
Address2
0D
H
Get_AS-i_Slave_Status
–> described in Section 3.3.15
Slave address Error record of the AS-i
slave
0F
H
Get_LPS, Get_LAS, Get_LDS,
Get_Flags
–> described in section 3.3.16
None LDS, LAS, LPS, flags 30
H
Get_Extended_Total_Configuration
–> described in section 3.3.17
Actual configuration,
current parameters,
LAS, flags
39
H
Store_Extended_Total_Configuration
–> described in section 3.3.18
Total
configuration
3A
H
Write_Extended_Parameter_List
–> described in Section 3.3.19
Parameter list 3C
H
Read_Extended_Parameter_Echo_List
–> described in section 3.3.20
Parameter echo list 33
H
Read_Version_ID
–> described in section 3.3.21
Versions*String 14
H
Read_AS-i_Slave_ID
–> described in section 3.3.22
Slave address ID*Code 17
H
Read_AS-i_Slave_Extended_ID1
–> described in section 3.3.23
Slave address Extended ID1 code 37
H
Write_AS-i_Slave_Extended_ID1
–> described in section 3.3.24
Extended ID1
code
3F
H
Read_AS-i_Slave_Extended_ID2
–> described in section 3.3.25
Slave address Extended ID2 code 38
H
Read_AS-i_Slave_I/O
–> described in section 3.3.26
Slave address I/O configuration 18
H
Get_LPF
–> described in section 3.3.27
LPF
3E
H
Write_AS-i_Slave_Parameter_String
–> described in section 3.3.28
Slave address,
parameter string
40
H
Read_AS-i_Slave_Parameter_String
–> described in section 3.3.29
Slave address Parameter string 41
H
Read_AS-i_Slave_ID_String
–> described in section 3.3.30
Slave address ID string 42
H
Read_AS-i_Slave_Diagnostic_String
–> described in section 3.3.31
Slave address Diagnostic string 43
H