Siemens FC122-ZA - Pre Configuration

36
Smart Infrastructure A6V10393190_h_en_--
2019-09-01
4.7.2 Pre configuration
After the panel is powered up, the following display is shown.
Change country setting by the navigation key
<u>.
Move to the second line with <q> and
select the appropriate Language with <u>.
Confirm the entry by the <ok> button.
The panel will restart with the country specific
presetting.
Change the first value ‘day’ with <p> / <q>
and move to the next with <u> and so on.
Confirm the entry by the <ok> button.
The system is now ready for individual
programming (see chapter 7).
Relevant to NL with EVAC module only:
If the EVAC module is mounted, the country setting is automatically selected by the
system.
ok
Set date & time
22.12.2012 08:08
p
q
u
t
Set date & time
01.01.2000 00:00
ok
Country settings
Presetting < UK >
Language < English >
Panel
will restart!
p
q
u
t
u
t
p
q
Country settings
Presetting t Factory setting u
Language t English u
p
q
u
t
Country settings
Presetting t Factory setting u
Language t English u
u
t
p
q