Siemens FC122-ZA - Fault Procedure

45
Smart Infrastructure A6V10393190_h_en_--
2019-09-01
6.2 Fault procedure
In the event of a fault, the panel displays the fault.
As an option, programmed outputs can be activated (e.g. fault dialer).
Press the <SILENCE BUZZER> button.
Buzzer is turned off.
Action is requested.
Solve the cause of the fault.
Acknowledge and reset the system to normal
operation by pressing the <ACKNOWLEDGE>
and <RESET> button.
è Access level 2 password is required.
Notice
The fault reoccurs if acknowledged but not resolved.
A list of possible '
Faults
' can be found in
chapter
12
.
Normal Operation
Siemens FC12X
22.12.2012 08:08
Fault 1
Battery 1/2
Zone 1 2/2