Siemens FC122-ZA - Enable; Disable Outputs

53
Smart Infrastructure A6V10393190_h_en_--
2019-09-01
6.4.9 Enable / disable outputs
Disable outputs generally and / or individually.
Push button <MENU>.
Select ‘Enable / disable’ and confirm with <ok>.
Select the respective Output (e.g. ‘Fire
outputs‘) and confirm with <ok>.
Select an output and change its property with
<u>.
Change output properties for other outputs as
needed.
Confirm all changes with <ok>.
Exit menu without change by pressing the
button <C> for the first time and then a second
time while the information is displayed.
C
Fire output 2
Output 1 t On u
ok
Fire output 2
Output 1 t On u
p
q
u
t
u
t
p
q
Enable / disable 2
Output 1 t Off u
Output 2 t On u
Output 3 t On u
Output 4 t On u
Output 5 t On u
Output
6
t
On
u
ok
u
t
p
q
Enable / disable 2
Zone u
Sounder t On u
outputs
Fault t On u
dialer
ok
u
t
p
q
Menu 2
Actual events u
Enable / disable u
History log u
Set date & time u
Login u
Logout u
t
Successful
ok save and exit
C exit without
saving