Siemens FC122-ZA - Appendix A: Site Configuration, Factory Setting

85
Smart Infrastructure A6V10393190_h_en_--
2019-09-01
Appendix A: Site configuration, Factory Setting
Customer: ____________________________________________________________
Description Default
Zone 1 2 3 4 5 6 7 8 9 10 11 12
Yes
No
No
No
No
Yes
No
No
No
Output 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Out 1
Out 2
Out 3
Fire output No
No
EN 54-13 supervision
Out 1,2
Out 3
1 2 3
Input 1
Input 3
Input 2
Accessory
Output card No
No
No
EVAC module No
Zone indication field No
Key switch set No
Ext. powered
Card 1
Card 2
Class change signal
Dependency reset
Sounder control
Alarm dialer
Fault dialer
EVAC Sounder NL
General Alarm
Active by zone alarm
General Alert
Active by zone alert
Alert by ext. input
Disable dialer outputs
Manned / unmanned
Toggle manned / unmanned
External PSU fault
Alarm dialer fault
Dialer device confirmation signal
Activate alert mode
ACK
SE ACK function
Reset
AVC
Mode
Activation
condition
Card 3
Date of Installation: ____________________
Control panel:
*
FC121-ZA (2 zones) /
*
FC122-ZA (4 zones) /
*
FC123-ZA (8 zones) /
*
FC124-ZA (12 zones)
Standard
Mixed MCP & det.
Menu On side programming
Pulse time
Mode
Y / N
GB continuity
Short = alarm
Direct
Via V1 / V2
Via AVC timer MCP direct
Device coincidence
Zone coincidence (zone pairs; 1&2, 3&4, etc.)
Level 2 access
Input
Mode
Any isolation
Any fault
Manned mode activated
Alarm dialer fault
Dialer device confirmation signal
V1 / V2 is running