9
Smart Infrastructure A6V10393190_h_en_--
2019-09-01
Modification history
h 2019-09-01 - Chapter '8.1.1 Tool installation'
g 2018-10-30 - Updated the company address
f 2015-09-09 - Screenshot in appendix A replaced with
language dependent screenshot.
e 2015-07-07 - Chapter '4.3.4 Short = Alarm' updated
- Chapter '10.3 Device test': Information
about the detector test in collective
mode added
d 2015-02-12 - Chapter '3.3.1 Electrical data'
- Chapter '7.2.10 Manned / unmanned'
c 2014-05-28 - Chapter '1 About this document':
Information about reference document
and source language added
- Chapter '3.3.1 Electrical data': Values for
Line resistance / capacitance changed
- Chapters '11.3 FC123-ZA calculation'
and '11.4 FC124-ZA calculation': Value
of threshold for requirement of external
power supply changed from 1200 mA to
1000 mA
- Editorial changes made
b 2014-04-15 - On Page 11, Change color of
housing&cover ('grey, ~RAL 7035' to
'grey ~RAL-Design 000 50 00')
- On Page 12/50/55, Change device
coincidence inhibit time (10→15)
- On Page 18, Change mixed zone
drawing (delete diode)
- Change 'Line resistance / capacitance'
- Add warning for ‘Short=alarm’ zone
function
a 2014-02-19 First version