Siemens Hicom 300 H - Deactivating Call Forwarding for a Line

Making multiline calls
109
109109
109
Step by Step
Deactivating call forwarding for a line
Precondition: The telephone is in the idle state. After a
line key has been pressed, an activated call forwarding
function is indicated on the display.
Only if it is not your primary line:
Press the line key for the required line.
With the call forwarding key:
Press the key. The lamp goes out.
Via the program/service key:
Press the key. The lamp lights up.
;>
Enter the service code.
or
Select and confirm.
Select and confirm.
Confirm.
You will find further HiPath 4000 features on
Æ page 75.
Line
Call forwarding
program/service
Feature settings?
Call forwarding?
Deactivate?