Siemens Hicom 300 H - Saving a Function on a Key

Step by Step
Storing numbers, system functions and timed reminders
66
6666
66
Saving a function on a key
Press the key. The lamp lights up.
=
Enter the service code.
or
Select and confirm.
and Press the programmable function key. Keyset configura-
tion is displayed.
Confirm.
Select and confirm one of the system functions prompted .
Confirm.
program/service
Key function?
Change?
New function:
Save?
Keys that have been preprogrammed by your ser-
vice personnel cannot be changed. Then "Re-
turn?" is shown.
You can now activate the function directly by
pressing the key. For functions, such as call wait-
ing, that can be alternately activated/deactivated,
you activate the function when you press the key
and subsequently deactivate it when you press
the key again. The key’s lamp is lit when the func-
tion is active.