Siemens Hicom 300 H - Making Project Calls; Setting up a Project Call

Step by Step
Making project calls
54
5454
54
Making project calls
External calls can be assigned to specific projects.
Precondition: Project numbers (from 1 to 5) have been
configured for specific projects and you have a code for
the project in question.
Setting up a project call
Press the key. The lamp lights up.
D
Enter a service code between 61 (for project number 1)
and 65 (for project number 5).
D
Enter the PIN.
or
Press the key. The lamp lights up.
Select and confirm.
Confirm.
or/possibly
Select and confirm PIN2 – PIN5.
and
D
Enter the external number.
Make your call in the usual way (Æ page 28).
program/service
program/service
PIN / COS?
PIN 1?
Project call mode is subject to a time limit. It is
deactivated automatically if you do not use your
telephone over a 5-minute period (for example).