Siemens Hicom 300 H - Voice Calling to a Fixed Destination; Voice Calling in a Group; Voice Calling to a Variable Destination

Using HiPath 4000 as an intercommunication system
93
9393
93
Step by Step
Voice calling to a fixed destination
The system code-number for "voice calling in the group"
+ the speed-calling code for the group member in ques-
tion is stored on the repertory key (Æ page 66).
Press the programmed repertory key.
A connection is immediately set up to the destination
loudspeaker.
The other functions are as described in “Voice calling to
a variable destination” on page 92.
Voice calling in a group
A normal connection within a group or team (for team
call = speed-calling number for team members 0 to 9 or
00 to 99) can also be set up via Voice calling. To do this,
voice calling is initiated from a group telephone.
Voice calling to a variable destination
C
Lift the handset.
or With the handset cradled: Handsfree talking.
D
Enter the system code-number for "voice calling in the
group" and
D the speed calling code for the group member in ques-
tion.
or
Press the key for "voice calling in the group" (must be in-
stalled)
and
D the speed calling code for the group member in ques-
tion.
The "voice calling in the group" function is line-in-
dependent – anyone can voice call anyone else.
Enter the code!