Siemens Hicom 300 H - Parking Via System Parking (Only Telephones Without a Display); Taking a Parked Call

Step by Step
System-wide parking (HiPath 4000)
44
4444
44
Parking via "system parking" (only tele-
phones without a display)
Press key (must be installed).
9
...
B
Enter and note a parking position number (0 to 9).
The call has been parked.
I
Replace the handset.
Taking a parked call
Via the keypad
C
Lift the handset or use the speakerphone function.
E
Enter the system code for "system parking" (if you have
any problems ask your service personnel).
9
...
B
Enter the parking position number (0 to 9) you have not-
ed and continue the call.
Via the repertory key
C
Lift the handset or use the speakerphone function.
Press the repertory key programmed with the system
code + parking position number and continue call.
or
Press the repertory key programmed with the system
code.
9 ... B Enter the parking position number (0 to 9) you have not-
ed and continue call.
Via "system parking" (only for telephones with no
display)
C Lift the handset.
Press key (must be installed).
9 ... B Enter the parking position number (0 to 9) you have not-
ed and continue call.
System parking
Enter the code!
System parking