Siemens Hicom 300 H - Restart the Telephone; Who to Contact if a Problem Occurs

Step by Step
Advice for users
158
158158
158
or Possible cause:
a) Attempt to use a barred function.
b) PIN entered incorrectly.
Possible response:
a) Contact your service personnel for authorization to
activate this function.
b) Enter the PIN correctly.
Possible cause:
Number not entered completely, star or pound key not
pressed.
Possible response:
Enter the number or code correctly
(or as instructed).
Possible cause:
Data transmission in progress.
Possible response:
Wait and then try again later.
Restart the Telephone
Other errors (e.g. the display shows "System forced
logoff") can be repaired sometimes by restarting the te-
lephone.
:=@ Press the keys simultaneously and follow further
prompting.
Who to contact if a problem occurs
Contact your service personnel for problems lasting
longer than, for example, 5 minutes.
Not authorized
Not allowed
Not available
Protected