Siemens Hicom 300 H - Forwarding Calls Automatically

Forwarding calls
71
7171
71
Step by Step
Cancelling a destination
Press the key. The lamp lights up.
:;
Enter the service code.
or
Confirm.
Select and confirm.
If a destination has been stored for fixed call forwarding,
the number is displayed.
Select and confirm.
Deactivating call forwarding
With the "call forwarding" key:
Press the key. The lamp goes out.
Via the Service Menu:
Select and confirm when the telephone is in the idle
state.
Activating call forwarding
With the "call forwarding" key:
Press the key. The lamp lights up.
Via the Service Menu:
Select and confirm when the telephone is in the idle
state.
Forwarding calls automatically
A call is diverted to the fixed call forwarding destination
even if you have not activated fixed call forwarding (and
provided that your system is configured for this facility).
Depending on how "forwarding ring no answer" (transfer
of ringing) has been programmed, calls are rerouted au-
tomatically if, for example, they are not answered after
several rings or they arrive when you are already en-
gaged in a call.
program/service
Destinations?
Fixed call forw.?
Delete?
Call forwarding
Call forwarding off?
Call forwarding
Fixed call forw. on?