Step by Step
Making calls in the team/ executive/secretary configuration
106
Deactivating call forwarding
N Open the Program/Service menu Æ page 29.
Select and confirm the option shown.
R Press the required trunk key.
or
j Enter the required trunk number.
or
R If available, press the CFW MULAP key.
Understanding LED messages of the CFW MULAP
key
S The LED on the CFW MULAP key is off - call forwarding
is not active for this trunk.
or
R The LED on the CFW MULAP key lights up - call for-
warding is active for this trunk.
or
T The LED on the CFW MULAP key flashes slowly - the
trunk is the destination of call forwarding.
Forward Line: Off
If you have activated call forwarding for a trunk, a
special dial tone sounds when the line is seized.
To Next Page
Loading...
