Privacy/security
79
Step by Step
Turning ringer cutoff on and off
If you do not wish to take calls, you can activate the ring-
er cutoff function. Calls are only identified by one ring
signal, an indication on the display, and a key which has
been programmed to flash (such as a trunk key).
Activating
c Open the idle menu Æ page 24.
Select and confirm the option shown
[1]
.
Deactivating
c Open the idle menu Æ page 24
[1]
.
Confirm.
Activating/deactivating
"Do not disturb"
If you do not wish to take calls, you can activate do not
disturb. Internal callers hear the busy tone, external call-
ers are connected to another phone, which you can
specify (contact your service personnel).
Activating
c Open the idle menu Æ page 24.
Select and confirm the option shown.
Activating
c Open the idle menu Æ page 24.
Confirm.
Ringer cutoff on
[1] "Differing display view in a HiPath 4000 environment" Æ page 123
Ringer cutoff off
DND on
DND off
When you lift the handset, you will hear a special
tone (continuous buzzing) reminding you that "Do
not disturb" is activated.
Authorized internal callers automatically override
the DND feature after five seconds.
To Next Page
Loading...
