Step by Step
Enhanced phone functions
60
Holding external calls
If you have programmed a hold key on your phone
Æ page 68, you can put external calls on hold.
Then all other stations can accept the call on the as-
signed trunk.
S Press the "Hold" key.
The message of the relevant trunk appears (e.g. 801)
and note the trunk number.
If available, the LED of the assigned trunk key flashes
slowly.
if nec.
\ or s Replace the handset or press the key shown.
Depending on the configuration, this may be necessary
so other members can also pick up the call on hold.
Accepting call on hold
Prerequisite: One or more calls are on hold. The phone
is idle.
N Open the Program/Service menu Æ page 29.
Select and confirm the option shown.
or
S If the "Retrieve" Æ page 68 key is available, press it.
j Enter the noted trunk number.
or
T If there is a "Line:" key available for the relevant trunk,
this flashes slowly. Press the key shown.
Held on line: 801
Retrieve line
To Next Page
Loading...
