Siemens HiPath OpenOffice - Forwarding Calls on Trunks

Making calls in the team/ executive/secretary configuration
105
Step by Step
Forwarding calls on trunks
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Activating call forwarding for one trunk activates the
function for all trunk keys assigned to this trunk in your
group.
N Open the Program/Service menu Æ page 29.
Select and confirm the option shown.
or
S If available, press the CFW MULAP key.
(You have programmed a key with the incomplete CFW
MULAP function, excluding the call forwarding type and
destination Æ page 68.)
S Press the required trunk key.
or
j Enter the required trunk number.
Select and confirm the option shown,
or
select and confirm the option shown,
or
select and confirm the option shown.
j Enter the destination number.
Confirm.
or
S If available, press the CFW MULAP key. (You have
stored the call forwarding type and destination on the
CFW MULAP key, Æ page 68.)
Forward Line: On
1=all calls
2=external calls only
3=internal calls only
Save