Enhanced phone functions
45
Step by Step
or
T Press the flashing key.
Pay attention to the notes on voice encryption
Æ page 78.
Using the speakerphone
A colleague addresses you directly over the speaker
with a speaker call. You hear a tone before the an-
nouncement. The other party’s name or station number
appears on the screen.
You can conduct the call with the handset or in speaker-
phone mode.
^ Lift the handset and answer the call.
or
Press the "OK" key to confirm your selection and answer
the call.
or
p Press the key and answer the call.
Enabling and disabling handsfree answerback
c Open the idle menu Æ page 24.
Select and confirm the option shown,
or
Select and confirm the option shown.
Accepting a call in a team Æ page 110.
Mute off
If handsfree answerback is enabled (see below),
you do not need to switch on the microphone -
you can answer directly. You can answer immedi-
ately in speakerphone mode.
If handsfree answerback is disabled (default set-
ting), follow the procedure described above.
Placing a speaker call to a colleague Æ page 54.
HF answerback on
HF answerback off
To Next Page
Loading...
