Basic functions
31
Step by Step
Answering a call via the loudspeaker
(speakerphone mode)
Suggestions for using speakerphone mode
• Tell the other party that you are using speakerphone
mode.
• The speakerphone works bests at a low receiving
volume.
• The ideal distance between the user and the tele-
phone set in speakerphone mode is about 50 cm
(approx. 20 inches).
The phone is ringing. The caller appears on the screen.
Pay attention to the notes on voice encryption
Æ page 78.
n Press the key shown. The LED lights up.
or
Confirm.
The speakerphone function is activated.
if nec.
+ or - Set the call volume. Keep pressing the key until the de-
sired volume is set.
Ending a call
n Press the key shown. The LED goes out.
or
s Press the key shown.
Switching to speakerphone mode
Prerequisite: You are conducting a call via the handset.
n \ Hold down the key and replace the handset. Then re-
lease the key.
if nec.
+ or - Set the call volume. Keep pressing the key until the de-
sired volume is set.
U.S. mode
If the country setting is set to U.S. (ask the service per-
sonnel), you do not have to hold down the loudspeaker
key when replacing the handset to switch to speaker-
phone mode.
n Press the key shown.
] Replace the handset. Proceed with your call.
if nec.
+ or - Set the call volume. Keep pressing the key until the de-
sired volume is set.
Answer
To Next Page
Loading...
