Getting to know your OpenStage phone
17
OpenStage Busy Lamp Field 40
The OpenStage Busy Lamp Field 40 is a key module, attached to the side
of the phone, that provides 90 additional illuminated, programmable sen-
sor keys.
Like keys on the phone, these sensor keys can be programmed and used
according to your needs Æ page 20.
You can attach one OpenStage Busy Lamp Field 40 to your OpenStage 40/
40 G.
Key label
Your OpenStage Busy Lamp Field 40 is delivered with label strips. Write
functions or names in the white fields on the label strips.
Alternatively, you can use the Key Labeling Tool to conveniently create new
label strips. For instructions on how to use it, please go to
http://www.enterprise-communications.siemens.com
> "Info Center" > "Downloads" > "Software" > "Labeling Tools".
Lay the labeled strips on the key fields and place the transparent cover over
them (rough side up).
Your OpenStage 40/40 G can be configured as an attendant console
in conjunction with an OpenStage Busy Lamp Field 40
(ask your ser-
vice personnel).
Other technical explanations, safety notices, and installation instruc-
tions can be found in the relevant documentation.
You can find these on the Internet at
http://www.enterprise-communications.siemens.com
To Next Page
Loading...
