Technical Instructions LMV Series
Document No. LV5-100
0
Section 8 Page 16 SCC Inc.
Overview of «Operating mode changeover of controller»
ies when in IntLC Bus. No
timeout if in ExtLC Bus since ExtLC Bus
never uses internal load control.
AZL manual operation uses same set load
register as Modbus manual operation.
This is the manual operation option from AZL.
IntLC Bus or ExtLC Bus may be selected for remote operation
but ExtLC Bus will not revert to local upon a comm. fault.
No function if in ExtLC Bus mode.
“ext LC” if in ExtLC Bus mode.
To Next Page
Loading...
