0
08/2005 Preface
0
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition v
Structure of the
documentation
The following information blocks, marked by pictograms, are used in
this documentation:
Orientation
Background information
Operating sequence
Explanation of parameters
Additional notes
Software option
The function described is a software option, i.e. the function can be
executed on the control only if you have purchased and enabled the
appropriate option.
Safety information
This manual contains information that must be observed to ensure
your personal safety and to prevent material damage. Information
relating to your personal safety is marked in the manual by a warning
triangle, no warning triangle appears in conjunction with information
that relates to property damage. The warning information is displayed
in descending order according to the decreasing level of danger as
follows.
Danger
indicates that death or severe personal injury will result if proper
precautions are not taken.
Alarm
Indicates that death or serious bodily injury can result if proper
precautions are not taken.
Caution
with a warning triangle indicates that minor personal injury can result if
proper precautions are not taken.
To Next Page
Loading...
Need help?
General
